Characterization in the icosahedral phase of the system Al63Cu25Fe12
DOI:
https://doi.org/10.15381/rif.v24i3.15617Keywords:
lcosahedral Phase, Characterization, Quasicrystal Al63Cu25Fe12.Abstract
The present work aimed to characterize the microstructure of the icosahedral phase (ɸ-quasicrystalline phase) of the system with stoichiometric composition of the quasicrystal Al63Cu25Fe12. The ternary alloy with nominal composition of Al63Cu25Fe12 was processed by Mechanical Alloying (MA) as a viable solid state processing method for producing various metastable and stable quasicrystalline phases. The structural characterization of the obtained samples was performed by X-ray diffraction (XRD) and Scanning Electron Microscopy (SEM), while the elemental composition of the chemical elements Al, Fe and Cu were determined by the technique of X-ray spectroscopy by dispersive energy (EDS). According to the results of XRD, the diffraction patterns of Al63Cu25Fe12 showed the presence of β-Al (Fe, Cu) and λ-Al13Fe4 phases coexist with the thermodynamic ɸ-phase quasicrystalline. Finally, elemental analysis indicates that during alloy synthesis there is little variation of the ideal composition. The results indicate that alloys with high percentage of icosahedral phase can be obtained by casting in the air.
Downloads
Published
Issue
Section
License
Copyright (c) 2021 Luciano Nascimento, Anastasia Melnyk
This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.
THE AUTHORS RETAIN THEIR RIGHTS:
a. The authors retain their trademark and patent rights, as well as any process or procedure described in the article.
b. The authors retain the right to share, copy, distribute, perform and publicly communicate the article published in the Revista de Investigación de Física (for example, place it in an institutional repository or publish it in a book), with an acknowledgment of its initial publication in the Revista de Investigación de Física.
c. The authors retain the right to make a subsequent publication of their work, to use the article or any part of it (for example: a compilation of their works, notes for conferences, thesis, or for a book), provided that they indicate the source. of publication (authors of the work, journal, volume, number and date).
