Determination of the discharge coefficient of a heavy hydraulic head slide gate
DOI:
https://doi.org/10.15381/rif.v23i3.20316Keywords:
Slide gate, sluice gate, discharge coefficientAbstract
The results of a field and office study to determine the discharge coefficient (Cd) of a "sluice gate" of a water storage and intake system of a hydropower project are reported. In most hydropower projects, water is withdrawn from a dam built on a riverbed. Downstream of the dam the living conditions in the river are altered. To remedy this situation, mainly in times of low water, water is released from the dam in a controlled manner (ecological flow), usually by operating the sluice gate. In this context, the problem of the reservoir operators is related to the opening of the sluice gate that guarantees the ecological flow for a given level of the water in the reservoir. To solve this problem, the discharge downstream of the gate was measured for 3 gate relative openings (5%, 10% and 15%) and different water levels in the reservoir. With these data Cd values were found. The results show that tends to increase for openings smaller than 15%. This tendency could be influenced by the geometry of the lower lip of the gate.
Downloads
Published
Issue
Section
License
Copyright (c) 2020 Bernardino Salvador Rojas
![Creative Commons License](http://i.creativecommons.org/l/by-nc-sa/4.0/88x31.png)
This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.
THE AUTHORS RETAIN THEIR RIGHTS:
a. The authors retain their trademark and patent rights, as well as any process or procedure described in the article.
b. The authors retain the right to share, copy, distribute, perform and publicly communicate the article published in the Revista de Investigación de Física (for example, place it in an institutional repository or publish it in a book), with an acknowledgment of its initial publication in the Revista de Investigación de Física.
c. The authors retain the right to make a subsequent publication of their work, to use the article or any part of it (for example: a compilation of their works, notes for conferences, thesis, or for a book), provided that they indicate the source. of publication (authors of the work, journal, volume, number and date).