Optimization in the Recovery of Zinc of polymethalic minerals through the flotation process in the company Mines and Metals Trading Perú - Huancavelica
DOI:
https://doi.org/10.15381/idata.v23i2.16632Keywords:
Recovery, Flotation, MinitabAbstract
The main objective of this research work was to optimize the recovery of zinc in the second stage of flotation of polymetallic minerals of the company Mines and Metals Trading Peru where its average annual recovery of zinc is 82%. At the concentrator plant, two samplings were carried out, the first one of fresh mineral in the belt No. 01 that feeds the primary grinding and the pulp were obtained from the bulk Pb / Ag flotation tails. During the study, preliminary flotation tests were carried out in order to select the most influential independent variables in the dependent variable using the MINITAB statistical program. Flotation tests were performed varying the dosage of copper sulfate (g / TM) and regrind time (minutes). With the results obtained, the optimization with the Hexagonal Design is carried out, obtaining maximum values of copper sulfate of 351.06 gr / TM and regrinding time of 5.06 minutes. With these results a theoretical recovery of 95.54% is obtained.
Downloads
Downloads
Published
Issue
Section
License
Copyright (c) 2020 Aroldo Inga Paucar, Vidal Sixto Aramburú Rojas, Rosa María Tiburcio Alva
![Creative Commons License](http://i.creativecommons.org/l/by-nc-sa/4.0/88x31.png)
This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.
AUTHORS RETAIN THEIR RIGHTS:
a. Authors retain their trade mark rights and patent, and also on any process or procedure described in the article.
b. Authors retain their right to share, copy, distribute, perform and publicly communicate their article (eg, to place their article in an institutional repository or publish it in a book), with an acknowledgment of its initial publication in the INDUSTRIAL DATA.
c. Authors retain theirs right to make a subsequent publication of their work, to use the article or any part thereof (eg a compilation of his papers, lecture notes, thesis, or a book), always indicating the source of publication (the originator of the work, journal, volume, number and date).