Use of self-reducing pellets in the production of alloys ( high chromium iron - carbon )
DOI:
https://doi.org/10.15381/iigeo.v15i29.2284Keywords:
Chromite, autorreductor agglomerate, iron-chromium, AutoshrinkAbstract
The self-reducing agglomerates were effective in reducing chromites for producing high carbon iron-chromium , improving the speed is reduced , or by increasing the efficiency of chrome recovery and electric power is economizing . The self-reducing pellets of Brazilian chromite containing petroleum coke and 2% Fe -75 % Si, bonded with Portland cement with and without addition of fluxantes (SiO2 and CaO) , were tested at 1773K until there was , evolution of gas reduction . The resulting product was analyzed by electron microscopy and the composition of the phases present by EDS . This work demonstrates that the addition of the composition fluxantes the self-reducing chromite pellets before being reduced causes formation of a slag phase , hindering reduction speed . The results showed that in the self-reducing agglomerates without adding fluxantes , the reduction rate was 2 times faster compared with fluxantes containing at 1773K . This confirms the importance of the mechanism of gas - solid reaction in the carbothermal reduction of the chromite .
Downloads
Published
Issue
Section
License
Copyright (c) 2012 Adolfo Pillihuaman Z., Manuel Shishido S.
![Creative Commons License](http://i.creativecommons.org/l/by-nc-sa/4.0/88x31.png)
This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.
AUTHORS RETAIN THEIR RIGHTS:
a. Authors retain their trade mark rights and patent, and also on any process or procedure described in the article.
b. Authors retain their right to share, copy, distribute, perform and publicly communicate their article (eg, to place their article in an institutional repository or publish it in a book), with an acknowledgment of its initial publication in the Rev. Inst. investig. Fac. minas metal cienc. geogr.
c. Authors retain theirs right to make a subsequent publication of their work, to use the article or any part thereof (eg a compilation of his papers, lecture notes, thesis, or a book), always indicating the source of publication (the originator of the work, journal, volume, number and date).